Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming Pool, Hot Tub - LIQUID PATCH Resistant to Fresh and Salt Water UV-Resistant Long-lasting - 40ML

Product Information

Clean/prime the back of the patch and the repair area, using a clean dry lint-free cloth, by wiping with MEK solvent or acetone. B. as adhesives are ‘contact’ adhesives then it is important to position the patch correctly as it will not be possible to re- position once in place). For Hypalon patches only - Abrade the back of the patch, together with the marked repair area on the tube with abrasive paper to achieve a 'key' for the adhesive.

DR BOAT LIQUID Patch Glue Repair Kit Hot Tub Boat Kayak

as adhesives are ‘contact’ adhesives then it is important to position the patch correctly as it will not be possible to re-position once in place).g. piece of shaped hardwood or screwdriver handle), working from the centre of the patch outwards to smooth out any air bubbles and ensure good contact. How to identify the fabric of your RIB, inflatable boat, dinghy, life raft or inflatable kayak collar, tube or sponson.

Repair Your PVC or Hypalon RIB How to Professionally Repair Your PVC or Hypalon RIB

Place a smooth sided heavy weight on the patch and allow to 'cure' for 24 hours before re- inflating the tubes to check that the repair has been successful and before re-launching the boat. It is recommended for repair of inflatable boats, mattresses, water attractions, trampolines, swimming pools, as well as frame products made of PVC fabric (awnings, tents). Open the tube with glue-sealant and apply a thick layer to the damage site, grasping the areas 10 - 15 mm around the damage.Place around the damage (puncture or cut) - preferably at least 20 mm in each direction -clean from dirt and dust and wipe with a swab dipped in a solvent to remove grease. Using a brush applicator apply an even thin coat of adhesive to both the back of the external tube patch and the masked repair area.